Knowledgebase
Cloud VDS install OS
Posted by Nikita Zubarev on 23 May 2018 16:25:27

Once you have successfully created your new VDS you need to check/configure your network settings.

In your Billing area click Services > My services and select the service you wish to configure. Press "Manage" button next to your server.

You can find information about managing your virtual servers in next section.

 

 

Open noVNC Console, login, change IP and restart network. 

 

Default login: root 

Password: def_passwd

 

 

 

 

 Add additional alias IP.

 

 

 

Assign Multiple IP Address Range

If you would like to create a range of Multiple IP Addresses to a particular interface called “ifcfg-eth0“, we use “ifcfg-eth0-range0” and copy the contains of ifcfg-eth0 on it as shown below.

[root]# nano /etc/sysconfig/network-scripts/ifcfg-eth0-range0
 

Now open “ifcfg-eth0-range0” file and add “IPADDR_START” and “IPADDR_END” IP address range as shown below.

[root]# vi ifcfg-eth0-range0

#DEVICE="eth0"
#BOOTPROTO=none
#NM_CONTROLLED="yes"
#ONBOOT=yes
TYPE="Ethernet"
IPADDR_START=172.16.16.126
IPADDR_END=172.16.16.130
IPV6INIT=no
#GATEWAY=172.16.16.100

Save it and restart/start network service

[root]# /etc/init.d/network restart

Verify that virtual interfaces are created with IP Address.

[root]# ifconfig
eth0      Link encap:Ethernet  HWaddr 00:0C:29:28:FD:4C
          inet addr:172.16.16.125  Bcast:172.16.16.100  Mask:255.255.255.224
          inet6 addr: fe80::20c:29ff:fe28:fd4c/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1385 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1249 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:127317 (124.3 KiB)  TX bytes:200787 (196.0 KiB)
          Interrupt:18 Base address:0x2000

eth0:0     Link encap:Ethernet  HWaddr 00:0C:29:28:FD:4C
          inet addr:172.16.16.126  Bcast:172.16.16.100  Mask:255.255.255.224
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          Interrupt:18 Base address:0x2000

eth0:1    Link encap:Ethernet  HWaddr 00:0C:29:28:FD:4C
          inet addr:172.16.16.127  Bcast:172.16.16.100  Mask:255.255.255.224
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          Interrupt:18 Base address:0x2000

eth0:2    Link encap:Ethernet  HWaddr 00:0C:29:28:FD:4C
          inet addr:172.16.16.128  Bcast:172.16.16.100  Mask:255.255.255.224
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          Interrupt:18 Base address:0x2000

eth0:3    Link encap:Ethernet  HWaddr 00:0C:29:28:FD:4C
          inet addr:172.16.16.129  Bcast:172.16.16.100  Mask:255.255.255.224
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          Interrupt:18 Base address:0x2000

eth0:4    Link encap:Ethernet  HWaddr 00:0C:29:28:FD:4C
          inet addr:172.16.16.130  Bcast:172.16.16.100  Mask:255.255.255.224
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          Interrupt:18 Base address:0x2000

 

 

 

Also need to make resize:

 

 

 

 

 

 

 

Install OS vis ISO

 

 

 

 

 

 

 

 

 

How to install and configure centos 7

(5 vote(s))
Helpful
Not helpful

Comments (0)
Post a new comment
 
 
Full Name:
Email:
Comments: